Breakout board CNC USB MACH3 100Khz + 4pcs Digital Stepper Motor Driver DM556 2 Phase DC20V-50V 5.6A 42 57 86 Motor Controller

Breakout board CNC USB MACH3 100Khz + 4pcs Digital Stepper Motor Driver DM556 2 Phase DC20V-50V 5.6A 42 57 86 Motor Controller

Description:

1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;

2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;

3. Support automatic probe tool

4. Support Emergency input

5. Support for limit switch

6. Support for connecting electronic handwheel

7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable

8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.

9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device

10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device

11. 1 status LED, indicate connection status on the board

Size: 8x7.7cm/3.15x3.03inch

Quantity: 1 Set

Note:

Please allow 1-3mm error due to manual
measurement. pls make sure you do not mind before you bid.

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Contents:

1 x USB CNC Controller Card

1 x USB cable

1 x CD –(if not get, please contact us. We will send you download link)

1.Introduction :

The DM556 is a versatility fully digital

stepping drive based on a DSP with advanced control algorithm. The DM556 is the

next generation of digital stepping motor controls. It brings a unique level of

system smoothness, providing optimum torque and nulls mid-range instability.

Motor self-test and parameter auto-setup technology offers optimum responses

with different motors and easy-to-use. The driven motors can run with much

smaller noise, lower heating, smoother movement than most of the drives in the

markets. Its unique features make the DM556 an ideal solution for applications

that require low-speed smoothness.

2.Features:

Extra smooth movement

Low drive & motor heating

Step & direction or CW/CCW control

DSP-based stepper control technology

Automatic motor identification and self

configuration

3.DM556 Specifications:

Input voltage: DC20-50V

Maximum frequency: 200KHz

Output current: 7 selections of 1.4-5.6A

via DIP switches;or any value of 0.1-11. 5.60A via software configuration

Size: 11.7*8.5cm/4.61*3.35 inch

4.Note:

Please allow 1-3mm error due to manual

measurement. pls make sure you do not mind before you bid

Due to the difference between different

monitors, the picture may not reflect the actual color of the item. Thank